6″ HI-FLOW OIL FILTER -12 115 MICRON BLACK ANODIZED

Description

6″ Hi-Flow See Through
Filter Assembly with #12 Ports
and 115 Micron Element, for
running 60 weight or heavier
oil. For Supercharged Hemi’s,
Pro Mod and Extreme Engine
combinations pushing high
volumes of
oil.

Features:

• Smallest
  Particles Filtered: 115
  Microns
• Bypass Relief
  Valve: Yes
• Inlet &
  Outlet Fitting: #12 O-Ring
  Boss – 1 1/16″ – 12
  TPI
• Operating Temp:
  max 220 degrees
  Fahrenheit
• Operating
  Pressure: max 150
  PSI
• Height: 3.250
  in.
• Width: 6.750
  in.
• Length: 7.750
  in.
• Filter Weight:
  5.75 pounds

See
Through Oil Filters can be
used for many applications
including Racing, Marine,
Automotive, Farm, and for
Industrial Hydraulic Systems.
These Patented Oil Filter
Assemblies allow the user to
visually see oil pumping
through the filter, which
helps to determine the
condition of the oil. When oil
is not being pumped through
the filter it can quickly
drained using an air chuck for
filling tires and compressed
air. A hand bicycle pump will
also work. Apply a small shot
of air to the air fitting on
the side of the inlet opening.
Oil will empty out of the
assembly in seconds exposing
the filter element and
filtered particles, even when
filtering non transparent
fluids like dirty oil. The See
Through top allows the user to
visually inspect particles and
contaminants that were
filtered out of the system to
determine if they are from
normal use or from bearings
and other components
excessively wearing in the
engine or machinery supplying
the Filter
Assembly.

• When
  using 50 weight or lighter oil
  a 60 micron element is
  recommended. When using 60
  weight or heavier oil A 115
  micron element is
  recommended.
• Filters
  have 2 Inlet and 2 Outlet
  Openings that are threaded for
  #12 O-Ring Boss – 1-1/16-12
  TPI fittings. The Inlet and
  Outlet Ports are machined to
  7/8″ diameter and will flow a
  #16 line when using #12 O-Ring
  Boss to #16 JIC bored out
  fittings. All 4 ports can be
  used, but #16 fittings can not
  go in and out of the same side
  of the filter
  assembly.