5/16″ S/S HARD LINE (7.94mm) STAINLESS STEEL 25ft 7.5M
5/16″ S/S HARD LINE (7.94mm) STAINLESS STEEL 25ft 7.5M
$129.00
Description
Aeroflow Performance 304 stainless steel hard lines areaircraft-quality, seamless thin wall tube which are double annealed for easier flaring and bending. This stainless-steel brake/fuel/oilline is ideal for routing lines along the chassis, framerails or anywhere flexible line is not required. These stainless-steel hard lines arerated for up to 6000 psi and designed for use with tube line adapter fittings or when using a flaring tool with tubenut/tube sleeve combinations.
The hard line is available in 25-foot rolls (7.6 meters) of 3/16″ (4.76mm), 1/4″(6.35mm), 5/16″ (7.95mm),3/8″ (9.52mm) or 1/2″ (12.7mm) outside diameter tubing.
Stainless steel tube manufactured to ASTM-A269standards.
NOTE: Stainless steel is more difficult to bend and flare, compared to typical steel line. We recommend that a professional-grade flaring tool be used with these lines.Stainless steel can also be difficult to seal when replacing an existing brake orfuel line. The previously installed line can create a wear pattern on the flare seatwhich will not allow the new stainless-steel flare to seal properly. When replacing an existing line we recommend a thorough inspection of the existing brake fitting, fuel fitting, junction block, wheelcylinder, brake caliper, etc. It’s possible that the existing component may need tobe replaced for a proper seal.
Additional information
| Weight | 0.8950 kg |
|---|---|
| Dimensions | 52.00 × 52.00 × 7.00 cm |
| Category list | |
| Brand | Aeroflow |
