COMPLETE SPRINT STEEL BOLT KIT- XXX / MAXIM – GRADE 8

Description

Includes everything you
need to put together your
Triple X Sprint Car. Packaged
separately so you know exactly
where they go and complete
with a list of all of its
contents. Each package is
marked with its location and
extra nuts and washers are
provided. All Bolts are Grade
8 with Nylock Thin Nuts and AN
Washers.

Complete with
Torque Tube Studs, Jacobs
Ladder Pins with Springs and
Clips, Perfect length Tail
Tank Bolts, Lower Motorplate
Bolts, Bell Crank, Pedals,
Wings, Steering, Brakes, Front
End, Engine Mounting to
Chassis, Shocks, Radius Rods
and More!

Bolts

Brake
Pedal to Car (1)
3/8-24 x 2″
Front
Motor Mount to
Chassis (2) 3/8-24 x
1″
Rear Wing Tee
to Wing (2) 3/8-24 x
1 3/4″
Rear Wing
Tee to Chassis (2)
3/8-24 x 1 3/4″
Power Steering
Bracket to Motorplate
(2) 3/8-16 x 1″ SCS
Steering Clamp on
Chassis (2) 3/8-24 x
1″
Left Front
Brake Caliper to Front
End (2) 3/8-24 x
1″
Upper
Motorplate to Block
(2) 3/8-16 x 1 1/2″
Watts Link Straps to
Watts Link (2) 3/8-24
x 2″
Rear Motor
Plate to Block (4)
3/8-16 x 1 1/4″ SCS
Motorplate to
Chassis (4) 3/8-24 x
2 1/2″
Torque
Ball Housing to
Motorplate (6) 3/8-16
x 1″ SCS
Throttle
Pedal to Throttle Rod
(1) 10/32 x 5/8″ SCS
Motorplate to
Floorpan (4) 10/32 x
3/4″ SCS
Nerfs,
Bumpers and Torque
Tube (16) 10/32 x 1
1/2″ SSCS
Pitman
Arm to Drag Link (1)
1/2-20 x 2″
Tie
Rod to Steering Arm R
(1) 1/2-20 x 2″
Tie Rod to Steering
Arm L (1) 1/2-20 x 1
3/4″
Drag Link to
Steering Arm (1)
1/2-20 x 2″
Upper
Rear Shock to Chassis
(2) 1/2-20 x 2 3/4″
Upper Front Shock to
Chassis (2) 1/2-20 x
3 1/2″
Lower
Front Shock to Axle
(2) 1/2-20 x 1 1/2″
Lower Rear
Shock (2) 1/2-20 x 2
1/2″
RF Steering
Arm to Spindle (2)
1/2-20 x 1 3/4″
Radius Rod to
Axle (3) 1/2-20 x 1
1/4″
Radius Rod
to Chassis (6) 1/2-20
x 2 3/4″
Wing
Cylinder to Chassis
(1) 1/4-28 x 1″
Upper Steering
Bracket to Chassis
(2) 1/4-28 x 1 3/4″
Bell Crank to
Chassis (1) 1/4-28 x
1 3/4″
Wing Valve
to Chassis (2) 1/4-20
x 3/8″
Front
Posts to Front Wing
(4) 1/4-28 x 1″
Wing Cylinder to
Wing Tee (1) 5/16-24
x 1″
Master
Cylinder to Pedal (1)
5/16-24 x 2 1/4″
Throttle Pedal to
Chassis (1) 5/16-24
Nut
Rear Front
Wing (2) 5/16-24 x 1
1/4″
1/2 Box
Steering Bracket to
Chassis (2) 5/16-24 x
1
Master Cylinder
to Chassis (2)
5/16-24 x 2 1/2″
Pinch
Clamps (4) 5/16-24 x
1 1/2″
Tank to
Chassis (4) 5/16-18 x
7/8″ SCS
Watts
Link to Birdcage (1)
Pin (1/2 x 1 1/2″) and Clip
Torque Tube Stud
Kit
(Studs, Nuts,
Washers) (1) 6 Studs,
Washers and Nuts
Rear Arm
Spacers (2) 1/2″ ID x
3/4″ OD Cone
Watts Link to
Chassis (2) Pin (3/8
x 4″), Clip and Spring
Rear Caliper to Rear
End (2) 7/16 x 14 x 1
1/2″
Nuts
10/32 Nylock 1/2
Nuts (5) 10/32″
1/4″ Nylock 1/2
Nuts (10) 1/4″
5/16″ Nylock 1/2
Nuts (12) 5/16″
3/8″ Nylock 1/2
Nuts (12) 3/8″
1/2″ Nylock 1/2
Nuts (22) 1/2″
Washers
1/4″ AN
Washers (5) 1/4″
5/16″ AN
Washers (15) 5/16″
3/8″ AN
Washers (35) 3/8″
7/16″ AN
Washers (2) 7/16″
1/2″ AN
Washers (10) 1/2″