GM LS KNOCK SENSOR CONVERSION LS1 DUAL HARNESS LS3
GM LS KNOCK SENSOR CONVERSION LS1 DUAL HARNESS LS3
$37.71
Description
Aeroflow Performance GM LS knock sensor conversion harness allows for dual wire knock sensors to be plugged into the factory LS1 harness. It adapts from the one knock sensor on the LS1 and convert over to the dual LS3/LSX knocksensor system. NOTE: In order to this you may require special PCM software changes or a PCM programmed for the use of dual wire knock sensors. Made from OEM Delphi-Packard connectors withhigh temp cross-linked polyethylene TXL wire. Total length is 1300mm.
This conversion harness is used when converting Holden Commodore VT-VZ models with a 5.7 Litre LS to a 6.0 Litre LSengine.
Knock sensor harness must use with Holden Commodore VY 5.7 Litre knock sensors. Must also drill and tap a larger M10x1.50mm thread into the 6.0 Litre engine block.
Additional information
| Weight | 0.3000 kg |
|---|---|
| Dimensions | 27.00 × 18.00 × 3.00 cm |
| Category list | Electrical, Looms, Plugs and Pins, Wiring Harnesses, Wiring Looms, Harnesses, Wiring Looms, Harnesses, Plugs and Pins |
| Brand | Aeroflow |
