HYPERSPARK IGNITION KIT, CHEVYSBC BBC
HYPERSPARK IGNITION KIT, CHEVYSBC BBC
$2,181.17
Description
Holley HyperSpark Master Kits were designed to make upgrading your ignition on a Sniper EFI-equipped engine simple. When installed concurrently with a new SniperEFI system, the combination creates the easiest to installEFI conversion on the market -only four flying lead connections required! This harness only requires one connection to a switched powersource, battery positive, battery negative, and fuel pump power.
The pre-terminated connectors and a built in 40A relay provides power to all of the componentswithin the system. With the included Sniper EFI Main Harness you no longer need to run multiple wires to provide switched power for each individual component. This notonly helps prevent wiring confusion, it will speed up your install time and clean upyour engine bay. Just route the harness and pre-terminatedconnectors to your HyperSpark coil, distributor, and ignition box and plug them in.
Features:
Plug and Play SniperEFI Main Harness replaces the standard Sniper EFI harness with four loose leads, BatteryPositive, Battery Ground, Switched 12v, and Fuel Pump Power, for a simple and streamline installation
Designed for existing or new Sniper EFIinstallations. The HyperSpark Master Kit harness retains thesame flying lead wire colors as the Sniper EFI main harness. New installations will not use the Sniper EFI standard harness or coil driver
Complete Ignition system in a box, including: HyperSpark IgnitionBox, HyperSpark Ignition Coil,HyperSpark Distributor (for your application), and a plug and play main harness
HyperSpark Distributors feature a Hall Effect crank trigger sensor providing a noise-free RPM signal to the Sniper ECU
Patented Clear Installation cap eliminates any confusion while installingthe distributor
HyperSparkCD Ignition box is seal and powder coated to be installed in the harshest of locations
External LEDon Hyperspark CD Ignition box helps verify 12v, cranking RPM, and low battery voltage
135mJ of sparkenergy when used with the HyperSpark Ignition coil, ensures complete combustion
Integrated ignition coil bracket simplifies mounting the Ignition coil
Ignitioncoil connector removes any doubt of loose connections at the Ignition coil
Enables timing control on a Sniper EFI Installation
Additional information
| Weight | 5.6400 kg |
|---|---|
| Dimensions | 44.20 × 30.00 × 23.40 cm |
| Category list | |
| Brand | Holley |
