TH350 400 HOLESHOT 2400 STALL CONVERTER 1965-91

Description

A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages andbenefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The highstall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machinethat is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated.
2300- 2500 rpm stall speed.
Mild to SeriousPerformance Applications.
Small & Big Blocks.
GM TH-350, TH-400, TH-425 & TH-375, TH-375B, will not fit TH-375C
Furnace brazedimpeller.
New precision steel alloy pump drive tube.
New heavy duty needle bearing between stator & impeller (not a thrust washer).
Needlebearing between stator & turbine.
Furnace brazed turbine.
Requires a small (10-3/4″) bolt circle flexplate or dual pattern flexplate..
New turbine hub.
New springs and rollers in stator.